english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
Q1 Series Tri-Color Lights: A Flexible Visual Indication Solution for Machines and Workshops
Machine status indication is most effective when it matches the equipment, alert logic and installation environment. Different applications may require different light colors, numbers of layers, buzzer modes, mounting bases or cable lengths. For this reason, a fixed configuration is not always the right solution.
The Q1 series tri-color light provides a flexible platform for machine status indication and workshop visual management. Its diameter, housing color, light layers, signaling mode and installation components can be selected according to the requirements of each project.
Q1 Series Configuration Overview
The Q1 series is available in two mainstream diameters: 50 mm and 60 mm. Users can select between black and white housings, configure one to five light layers, and choose from red, yellow, blue, green and white light colors.
| Configuration Item | Available Options | Application Consideration |
|---|---|---|
| Light diameter | 50 mm or 60 mm | Select according to equipment dimensions, installation space and visual management requirements. |
| Housing color | Black or white | Allows the light to coordinate with the appearance of the machine or control enclosure. |
| Number of layers | 1 to 5 layers | Configure the number of layers around the machine states that need to be displayed. |
| Light colors | Red, yellow, blue, green and white | Colors can be selected and arranged to suit the project’s status and alert logic. |
| Buzzer | With or without buzzer | Add an audible alert when visual indication alone is not sufficient for the application. |
| Signal modes | Steady-on light with buzzer, red flashing with buzzer, or full flashing with buzzer | Choose a mode based on the visibility and urgency required for each alert scenario. |
| Mounting base | Standard square base or optional round base | Select a base compatible with the available mounting position. |
| Base material | Custom material supported | Can be specified when the standard base material does not meet project requirements. |
| Pole length | Adjustable to installation requirements | Helps position the signal light for suitable visibility at the installation site. |
| Cable length | Adjustable to installation requirements | Can be matched to equipment layout and wiring distance. |
| Brand customization | Available from 1 piece, free of charge | Add a logo or brand identity without a minimum-order burden. |
Machine and Workshop Application Scenarios
By combining visual layers, light colors and audible alerts, the Q1 series can be adapted to different status indication and visual management tasks.
Machine Operating Status
A multi-layer configuration can provide separate visual indications for the equipment conditions defined by the user. The required colors and number of layers can be selected to match the machine’s control logic.
Fault and Warning Alerts
Applications requiring greater visibility can use flashing light and buzzer combinations. Available options include red flashing with buzzer and full flashing with buzzer.
Workshop Visual Management
Q1 lights can support at-a-glance status identification across a workshop. Consistent color and signaling rules can make it easier for personnel to recognize equipment conditions.
Space-Constrained Installation
Two diameter options, two base shapes and adjustable pole and cable lengths make it easier to configure the light around the available installation space.
How to Configure a Q1 Signal Light
1. Define the States to Be Displayed
Begin by identifying how many equipment states or alert categories require a dedicated visual indication. This determines whether the application needs one layer or a configuration of up to five layers.
2. Select the Light Colors
Choose from red, yellow, blue, green and white, then arrange the colors to match the status definitions used by the machine or workshop. The final color logic should remain consistent with the customer’s own operating procedures.
3. Decide Whether an Audible Alert Is Needed
The Q1 series can be supplied with or without a buzzer. Where sound is required, users can select steady-on light with buzzer, red flashing with buzzer, or full flashing with buzzer according to the intended alert scenario.
4. Match the Installation Structure
Choose a 50 mm or 60 mm light body and a black or white housing. The standard mounting option is a square base, while a round base is also available. Custom base material can be supported when required.
5. Confirm Pole and Cable Lengths
Pole length and cable length can both be adjusted according to site installation demands. Confirming these dimensions before ordering helps the signal light fit the equipment layout and wiring arrangement more effectively.
Brand Customization from Just One Piece
Q1 series brand customization is available from only one piece and is completely free of charge.
Your logo and brand identity can be added to the light, making it possible to create branded andon lights without a high minimum order quantity. This option is suitable for single-machine projects, samples, replacement requirements and customized equipment builds.
Information to Prepare Before Customization
To configure a suitable Q1 solution efficiently, prepare the following project details:
- Preferred diameter: 50 mm or 60 mm
- Housing color: black or white
- Required number of light layers: one to five
- Selected colors and their preferred arrangement
- Buzzer requirement and preferred signaling mode
- Square or round mounting base
- Any custom requirement for the base material
- Required pole length and cable length
- Logo or brand identity for customization, if needed
Frequently Asked Questions
How many light layers can the Q1 series support?
The Q1 series can be configured with one to five light layers.
Which light colors are available?
Available colors include red, yellow, blue, green and white. The selection and arrangement can be configured according to the application.
Can the Q1 light include an audible alarm?
Yes. Configurations with and without a buzzer are both available. Buzzer-related options include steady-on light with buzzer, red flashing with buzzer, and full flashing with buzzer.
Can the mounting base be changed?
Yes. The standard option is a square base, and a round base is available as an alternative. Custom base material is also supported.
Are custom pole and cable lengths available?
Yes. Both pole length and cable length can be adjusted according to the installation requirements of the site.
Is there a minimum order quantity for logo customization?
Brand customization starts from just one piece and is provided free of charge.
Build a Q1 Solution Around Your Equipment
From light diameter and layer arrangement to buzzer mode, mounting base, pole length and cable length, the Q1 series can be configured around the needs of individual machines and workshop visual management systems.
Contact our team with your required colors, light layers, installation dimensions and branding details, and we will help customize a suitable Q1 tri-color light solution for your equipment.
